The followings are parts of service DECL Singapore Pte Ltd provides :
A. In-Situ Testing
Including site investigation, Cone Penetration test(CPT), Rock Hydraulic Fracture test, Borehole Camera test, Pumping test, Plate Loading test and Flat Dilatometer test (DMT), etc
B. Pile Loading Test
Static Load Test: Over a hundred piles are tested with this conventional pile load test method each year in Singapore and the Southeast Asian Area.
Dynamic Load Test: A pile load test method using Pile Driving Analyzer and matching Wave Equations to estimate pile capacities. We conduct Dynamic load test in Singapore according to ASTM-D4945 standards.
STATNAMIC Load Test: Statnamic pile load test is a Rapid Load Test method directly measuring applied pile loads and displacements which provides user-independent load test results. We conduct Statnamic load test in Singapore according to CP4 (Singapore), EN 22477-10 and ASTM-D7383 standards.
C. Pile Integrity and Structure Evaluation Tests
Pile Integrity Test: Using impact echo, ultrasonic cross hole logging and vibration methods to perform the test.
Structure: Ground Penetration Radar, Ultrasonic and Impact Echo technique are used to evaluate a structure.
D. Instrumentation
Instrumentation and automatic data logging equipment are used to monitor the pore pressure, rock stress, displacement, vibration, concrete strain and joint movement
E. Laboratory Test
Dynamic Triaxial Test, Servo-Controlled Resonant/ Torsional Column Test, Digital Control Stress- Path Test and Large Scale Servo Controlled loading Testing
F. Micro-Vibration & Earthquake Measurement
Perform a micro-vibration measurement and analysis for semi-conductor plant. Install and measure the earthquake activities via a real-time data acquisition and alarm system.
Including site investigation, Cone Penetration test(CPT), Rock Hydraulic Fracture test, Borehole Camera test, Pumping test, Plate Loading test and Flat Dilatometer test (DMT), etc
B. Pile Loading Test
Static Load Test: Over a hundred piles are tested with this conventional pile load test method each year in Singapore and the Southeast Asian Area.
Dynamic Load Test: A pile load test method using Pile Driving Analyzer and matching Wave Equations to estimate pile capacities. We conduct Dynamic load test in Singapore according to ASTM-D4945 standards.
STATNAMIC Load Test: Statnamic pile load test is a Rapid Load Test method directly measuring applied pile loads and displacements which provides user-independent load test results. We conduct Statnamic load test in Singapore according to CP4 (Singapore), EN 22477-10 and ASTM-D7383 standards.
C. Pile Integrity and Structure Evaluation Tests
Pile Integrity Test: Using impact echo, ultrasonic cross hole logging and vibration methods to perform the test.
Structure: Ground Penetration Radar, Ultrasonic and Impact Echo technique are used to evaluate a structure.
D. Instrumentation
Instrumentation and automatic data logging equipment are used to monitor the pore pressure, rock stress, displacement, vibration, concrete strain and joint movement
E. Laboratory Test
Dynamic Triaxial Test, Servo-Controlled Resonant/ Torsional Column Test, Digital Control Stress- Path Test and Large Scale Servo Controlled loading Testing
F. Micro-Vibration & Earthquake Measurement
Perform a micro-vibration measurement and analysis for semi-conductor plant. Install and measure the earthquake activities via a real-time data acquisition and alarm system.
Site powered by Weebly. Managed by Exabytes - Singapore